What fiber and connector does 200G QSFP56 FR4 need?
Duplex single-mode fiber on Duplex LC, listed for 2km. It reuses ordinary structured single-mode cabling, which is usually why it is chosen over a parallel option at the same rate.
100G and 200G Optical Transceivers Product Detail
200G QSFP56 FR4
200G QSFP56 FR4 is a QSFP56 FR4 option using Duplex LC for 2km single-mode fiber links.
Published reference model: OPQH02
This page includes a reference part number and key optical and electrical parameters. Confirm compatibility coding, temperature grade, and the latest specification before volume purchase.
- Product family
- QSFP56 FR4
- Optical interface
- Duplex LC
- Typical reach
- 2km
- Transmission medium
- Single-mode Fiber
QSFP56FR42km SMFDuplex LCQSFP56 FR4
Specs & Features
Features and specifications
For the latest specification and samples, contact sales@staricatech.com.
Product overview
200G QSFP56 FR4 is designed for 2km links using Duplex LC. Selection must confirm the host form factor, electrical interface, PMD, FEC, fiber mapping, power and thermal limits, software version and the remote endpoint; the model name alone does not establish interoperability.
-
QSFP56 FR4 form factor for the defined host-port direction.
-
Duplex LC interface for 2km links.
-
WDM single-mode optical transmission; confirm the exact fiber or cable assembly before ordering.
-
Validate host coding, FEC, diagnostics, power, thermal behavior and long-duration stability.
Selection and deployment notes
- Before ordering 200G QSFP56 FR4, confirm the exact host, software, port mode, reach, fiber or cable, connector, FEC, temperature, quantity, compatibility coding and delivery version.
Form factor
QSFP56
Data rate
4x53.125Gb/s PAM4, 212.5Gb/s aggregate
Fiber type
Single-mode Fiber
Receiver sensitivity
<= -6.0dBm
Product
200G QSFP56 FR4
Reference P/N
OPQH02
Transmission
WDM single-mode optical transmission
Interface
Duplex LC
Typical reach
2km
Standards direction
200GBASE-FR4
Tx / Rx
CWDM EML / PIN
Transmit power
-4.2~+4.7dBm
Power and management
+3.3V, I2C interface
Temperature range
0~70℃
Compliance direction
Confirm the exact declaration in delivery documents
- Data-center, access and enterprise optical links
- Compatibility and sample validation
- Network rollout and replacement planning
- Lab and acceptance testing
Selection FAQ
200G QSFP56 FR4 selection questions
How does 200G QSFP56 FR4 differ from a parallel single-mode module at the same rate?
200G QSFP56 FR4 carries the full rate over a single fiber pair, so it drops into existing duplex cabling. A parallel variant needs an MPO trunk and is chosen when the plan is to break the link out to lower-rate ports. Reach targets also differ, so compare against the measured link budget.
What do I need to specify to request a quote for 200G QSFP56 FR4?
Give the host vendor, model and software version at both ends, the QSFP56 port or lane mode, the operating temperature range, the quantity per site and the target delivery date. For 200G QSFP56 FR4 also state the measured link distance and the number of patch points in the path. Compatibility is confirmed per platform, so the host details matter as much as the optical specification.
Related Products
Related 100G and 200G Optical Transceivers products
200G QSFP56 SR4
200G QSFP56 SR4 is a QSFP56 SR4 option using MPO-12 for 70m OM3 / 100m OM4 multimode fiber links.
200G QSFP-DD LR4
200G QSFP-DD LR4 is a QSFP-DD LR4 option using Duplex LC for 10km single-mode fiber links.
200G QSFP-DD ER4
200G QSFP-DD ER4 is a QSFP-DD ER4 option using Duplex LC for 40km single-mode fiber links.